10 Misconceptions Your Boss Shares About Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.
Regularly cleaning and lubricating upvc window repair (ehlers-simon.mdwrite.net) windows and doors is essential. This will reduce repair costs as well as increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.
Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the old panes. In this situation you'll need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.
It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.
2. Sagging
uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sagging.
Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to unblock the windows to reach the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.
If you cannot reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your upvc window repair near me windows are watertight and safe from drafts.
UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and then perform an experiment to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.
This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the problem the old caulking might need to be removed before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.
It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.
Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.
If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges could be the reason if your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace hinges in just a few minutes.
Like any mechanical part hinges will be damaged over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler with someone else to assist in holding the frame in place.
It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates the direction in which the window should open.
Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you suggestions.
Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by different factors. The hinges can also be disaligned as a result of wear, creating an opening where the sash meets frame. If they are damaged beyond repair, it might be required to realign them. The interlock may also become unbalanced. This is located on the hinge side and could require to be cleaned. In some instances it might be necessary to replace the hinges.
These seals can wear down or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the possibility of draughts.
Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can help block out cold air and keep your home warm and cozy!
With a bit of regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window you should consult a professional immediately.